- Example of wrong sorting
- The most flexible and versatile solution I could cook up
- The ultimate string or number sorting function
- Examples of Sort-STNumerical
- What about those IPv4 addresses?
- The IPv4 System.Version trick

The code in this article is compatible with PowerShell version 2 and up.

For numbers to be sorted correctly by a computer, a workaround is to make them so-called “zero-padded”. This means e.g. “001, 002 … 010” or “01, 02 … 10” instead of simply “1, 2 … 10”.We’ve all (at least you are about to – or just did) seen the incorrect sorting where “2” is put after 19, then comes 20, 21, 22, and so on, assuming a sequence of numbers with no missing numbers “in between”, unlike in my example below where “3” comes after 20, but that just further clarifies the point.

It looks like this when I reproduce the problem by using the range operator “..” to enumerate numbers from 1 to 20 (“1..20”), cast to a string type to get the incorrect sorting and finally sort them with the cmdlet Sort-Object, using no parameters for Sort-Object. It is actually a very flexible cmdlet.

PS C:\temp> 1..20 | %{ [System.String] $_ } | Sort-Object 1 10 11 12 13 14 15 16 17 18 19 2 20 3 4 5 6 7 8 9

Or rather in the case where you use the advanced function, you will use the -MaximumDigitCount parameter.

To make it dynamic, putting the number in a variable works, and that way you can adapt it easily.I wanted to use a "likely ridiculously large enough number", such as 8192, but the maximum (found by trial and error...) is 100 for the -f operator in .NET/PowerShell.

I will therefore just use the maximum of 100. If you’re processing very large files, you might want to limit it to a more “close-to-reality” number, such as maybe 10 or whatever, depending on your data, but I wouldn’t worry about it until I had to if I were you. $MaximumDigits = 100 "{0:D$MaximumDigits}" -f $NumberHereI’ll briefly demonstrate how this works on the basic level since it helps you understand the method cognitively.

PS C:\> "{0:D2}" -f 1 01 PS C:\> ("{0:D2}" -f 1).GetType().FullName System.String PS C:\> "{0:D3}" -f 1 001 PS C:\> "{0:D4}" -f 1 0001 PS C:\> "{0:D5}" -f 1 00001

… And so on.

Then we implement this inside the match evaluator and should after that be able to throw most anything at this and get it sorted correctly.As I finished the paragraph above, I decided to implement it as a small advanced function, so there will be a short delay now, but fortunately you don’t read this in real-time.

It took me about 9 minutes to write this function, and then an hour to make it OK, document it and have it (hopefully) bug-free (a lot of it spent wondering why it suddenly didn't work, and then guessing the maximum for "-f and 'D##'", which is "100" - go figure - I tried 8192... optimistic, ha). There's some docs at Microsoft here.

function Sort-STNumerical { <# .SYNOPSIS Sort a collection of strings containing numbers, or a mix of this and numerical data types - in a human-friendly way.This will sort "anything" you throw at it correctly.

Author: Joakim Borger Svendsen, Copyright 2019-present, Svendsen Tech.MIT License

.PARAMETER InputObject Collection to sort. .PARAMETER MaximumDigitCount Maximum numbers of digits to account for in a row, in order for them to be sorted correctly. Default: 100. This is the .NET framework maximum as of 2019-05-09. For IPv4 addresses "3" is sufficient, but "overdoing" does no or little harm. It might eat some more resources, which can matter on really huge files/data sets. .EXAMPLE $Strings | Sort-STNumerical Sort strings containing numbers in a way that magically makes them sorted human-friendly .EXAMPLE $Result = Sort-STNumerical -InputObject $Numbers $Result Sort numbers in a human-friendly way. #> [CmdletBinding()] Param( [Parameter( Mandatory = $True, ValueFromPipeline = $True, ValueFromPipelineBypropertyName = $True)] [System.Object[]] $InputObject, [ValidateRange(2, 100)] [Byte] $MaximumDigitCount = 100, [Switch] $Descending ) Begin { [System.Object[]] $InnerInputObject = @() [Bool] $SortDescending = $False if ($Descending) { $SortDescending = $True } } Process { $InnerInputObject += $InputObject } End { $InnerInputObject | Sort-Object -Property ` @{ Expression = { [Regex]::Replace($_, '(\d+)', { "{0:D$MaximumDigitCount}" -f [Int] $Args[0].Value }) } }, @{ Expression = { $_ } } -Descending:$SortDescending } }

To use it, put it in a file and dot-source it, or just paste the function into your terminal for a “one-off”.

You can download it from GitHub here.If you put it in a file, you use it by dot-sourcing it, like this:

. .\Sort-STNumerical.ps1Notice the two periods and the space between them. This means putting the content of the file into your current session. In this case it imports the function Sort-STNumerical. ST is short for Svendsen Tech, as a sort of namespace for (some of) my functions.

PS C:\temp> 1..20 | %{ [System.String] $_ } | Sort-STNumerical 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

And we see it sorts correctly.

Those work as well. I put three IPs, as strings, in the variable $IPAddresses that will demonstrate the incorrect default string sorting, as perceived by humans.

PS C:\temp> $IPAddresses 10.0.0.1 10.0.0.19 10.0.0.2 PS C:\temp> $IPAddresses | Sort-Object # incorrectly sorted 10.0.0.1 10.0.0.19 10.0.0.2 PS C:\temp> $IPAddresses[0].GetType().FullName System.String PS C:\temp> $IPAddresses | Sort-STNumerical 10.0.0.1 10.0.0.2 10.0.0.19 PS C:\temp> Sort-STNumerical -InputObject $IPAddresses 10.0.0.1 10.0.0.2 10.0.0.19

That can be accomplished in this way:

PS C:\temp> $IPAddresses | Sort-Object -Property @{ Expression = { [Version] $_ } } 10.0.0.1 10.0.0.2 10.0.0.19Powershell Windows Sorting String Networking All Categories

*
Minimum cookies is the standard setting. This website uses Google Analytics and Google Ads, and these products
may set cookies. By continuing to use this website, you accept this.*